Nortrade


Go to content

LoDril Kellybar Machines

Drilling Equipment

LoDril with telescopic kelly bar
The LoDril telescopic kelly bar drilling machines are attachments for mounting on excavators. They are the key to solve the most difficult drilling challenges.

  • On slopes or uneven terrain.
  • Under bridges and high tension lines.
  • With long overhead (reach).
  • Over and under obstackles.
  • In rough terrain.
  • All the way around (360 degrees) from one excavator position.


On Slopes or Uneven Terrain. As an excavator based attachment, the LoDril can work where no other drill rigs can go, whether it is on slopes, muddy flats or uneven terrain.

Under Powerlines, Bridges or Other Obstacles. The LoDril's low profile and telescopic kelly bars makes it possible to drill deep where headroom limitations prohibit high-masted equipment. It means that LoDril is perfect for working under low overhead obstackles or even inside buildings.

Reach Out or Reach Under. Reach over casings, retaining walls, barriers or other obstructions and put LoDril to work. The LoDril can drill anywhere in a 360 degree radius and reach over trenches or other obstackles. The LoDrill can effectively reach as long as 5.5 m beyond the tracks.

Install the LoDril in your own Workshop. The LoDril can be installed at your own facility or with experienced fitters by yourself.

Engineered and Built to the Customer's Specification. The LoDril's are custom engineered to specifications and job conditions. It means that they are built to efficiently handle the specific types of jobs and drilling conditions of the customer. Further, it will be built to fit the excavator the customer selects. The LoDril can be manufactured to fit most excavators from 12 to 50 tons.


LoDril Main Features

The LoDril machines are available in different sizes with different size rotary drive. Each size LoDril can be configured to suit individual demands concerning total height, housing length, number of kelly bar sections, length of kelly bars etc.

  • Rotary torque from 14 kNm to 149 kNm.
  • Friction square kelly shaft.
  • Depth up to 30 m.
  • Hole diameter from 0.3 m to 3.6 m.
  • Total height of LoDrill attachment from 2.7 m to 10 m.
  • Easy operation using standard stick controls.
  • Crowd cylinder provides maximum down force.
  • Level and depth indicators.
  • Powerful Pull-Master winches.



LoDril Specifikations

Dim.

DH10

DH18

DH24

DH40

DH60

DH80

DH100

Torque at Low Drill Speed

kNm

14

24

33

58

84

114

149

Std. Kelly Winch Line Pull
(Bare Drum)

kN

22

53

80

80

111

133

133

Hole Diameter (Depending
on Ground Conditions etc.)

mm

900

1200

1500

2100

2700

3300

3600

Drill Speed Range - Low/High/Spin Off

rpm

25/50/
100

30/60/
100

30/60/
100

30/60/
100

20/50/
100

20/50/
100

20/50/
100

Hole Depth (Depending on LoDril Configuration)

m

9-15

9-30

9-24

9-24

12-30

12-30

12-24

LoDril Attachment Height
(Depending on Configuration)

m

2.7-4.3

3.0-6.4

4.9-6.7

4.0-7.3

5.2-8.0

6.7-10.0

6.7-10.0

LoDril Attachmnet Weight

tons

1.8-2.3

3.2-3.6

4.0-4.8

5.9-7.3

6.8-7.7

10-11

11-12

Hydraulic Flow Capacity
(Required for Specified Drill Speed Range)

l/min

2 x 76

2 x 132

2 x 189

2 x 242

2 x 280

2 x 320

2 x 320

Excavator Weight Class

tons

7 - 15

15 - 22

22 - 29

32 - 43

34 - 45

4 5- 68

45 - 68

DH18-31M
LoDril Specifikations

  • Torque; 24.3 kNm at 30 rpm (low drill speed).
  • Drill Speeds (rpm): 30/60/100 (spoil spin off).
  • Kelly Winch: 5.1 tons, Bare Drum.
  • Kelly Winch Speed: 30.5 m/min, Hoisting.
  • Kelly Winch Speed: 137 m/min, Lowering.
  • Service winch: 2.25 tons, Bare Drum.
  • Side Tilt Inclination: 10 Degrees in both Directions.
  • Fore/Aft Inclination: 10 degrees in each Direction.
  • Crowd Stroke: 910 mm.
  • Drilling Depth: 31 m.
  • Crowd Force: 7 tonnes max.
  • Crowd Force 3.5 tonnes with Friction Kelly.
  • Attachment weight: 4.1 tonnes.
  • LoDril Operating Pressure: 310 bar.


If mounted on a CAT 323DL:
Excavator Specifications

  • Rated Power: 110 kW (150 HP).
  • Hydraulic Flow: 2 x 205 l/min.
  • Excavator Weight: 24.4 tonnes.
  • Overall Width: 2.98 m
  • Track Width: 700 mm.


DH24-21M
LoDril Specifikations

  • Torque: 32.5 kNm at 30 rpm (low drill speed).
  • Drill Speeds (rpm): 30/60/100 (spoil spin off).
  • Kelly Winch: 6.8 tons, Bare Drum.
  • Kelly Winch Speed: 48 m/min, Hoisting.
  • Kelly Winch Speed: 220 m/min, Lowering.
  • Service Winch: 2.25 tons, Bare Drum.
  • Service Winch Speed: 41 m/min, both hoist and lowering.
  • Side Tilt Inclination: 10 Degrees in both Directions.
  • Fore/Aft Inclination: 10 degrees in each Direction.
  • Crowd Stroke: 910 mm.
  • Drilling Depth: 21 m.
  • Crowd Force: 9 tonnes max.
  • Crowd Force: 4.5 tonnes with Friction kelly.
  • Attachment Weight: 4.9 tonnes.
  • LoDril Operating Pressure: 310 bar.
  • Additional Counterweight: 4 tonnes.


If mounted on a Hitachi Zaxis 280 excavator:
Excavator Specifications

  • Rated Power: 140 kW (190 HP).
  • Hydraulic Flow: 2 x 227 l/min.
  • Excavator Weight: 26.7 tonnes.
  • Total Weight: 35.6 tonnes.
  • Overall Width: 3.4 m.
  • Track width: 800 mm.


Home | The Company | Lifting Equipment | Impact Hammers | Capping Systems | Drilling Equipment | Sheet Pile Extractor | Push-Pull Silent Piler | Sheet Pile Threaders | Vibratory Hammers | Site Map


Sub-Menu:


Back to content | Back to main menu